Configuration Reference

This section is a quick index for looking up configuration. Click on the element name to go to the specific chapter.

Broker Configuration

broker.xml

This is the main core server configuration file which contains the core element. The core element contains the main server configuration.

Modularising broker.xml

XML XInclude support is provided in broker.xml so that you can break your configuration out into separate files.

To do this ensure the following is defined at the root configuration element.

xmlns:xi="http://www.w3.org/2001/XInclude"

You can now define include tag's where you want to bring in xml configuration from another file:

<xi:include href="my-address-settings.xml"/>

You should ensure xml elements in separated files should be namespaced correctly for example if address-settings element was separated, it should have the element namespace defined:

 <address-settings xmlns="urn:activemq:core">

An example can of this feature can be seen in the test suites:

./artemis-server/src/test/resources/ConfigurationTest-xinclude-config.xml

Note: if you use xmllint to validate the XML against the schema you should enable xinclude flag when running.

--xinclude

For further information on XInclude see:

https://www.w3.org/TR/xinclude/

Reloading modular configuration files

Certain changes in broker.xml can be picked up at runtime as discussed in the Configuration Reload chapter. Changes made directly to files which are included in broker.xml via xi:include will not be automatically picked up unless the file timestamp on broker.xml is also modified. For example, if broker.xml is including my-address-settings.xml and my-address-settings.xml is modified those changes won't be loaded until the user uses something like the touch command to update the broker.xml file's timestamp to trigger a reload.

System properties

It is possible to use System properties to replace some of the configuration properties. If you define a System property starting with "brokerconfig." that will be passed along to Bean Utils and the configuration would be replaced.

To define global-max-size=1000000 using a system property you would have to define this property, for example through java arguments:

java -Dbrokerconfig.globalMaxSize=1000000

You can also change the prefix through the broker.xml by setting:

<system-property-prefix>yourprefix</system-property-prefix>

This is to help you customize artemis on embedded systems.

The core configuration

This describes the root of the XML configuration. You will see here also multiple sub-types listed. For example on the main config you will have bridges and at the list of bridge type we will describe the properties for that configuration.

Warning

The default values listed below are the values which will be used if the configuration parameter is not set either programmatically or via broker.xml. Some of these values are set in the broker.xml which is available out-of-the-box. Any values set in the out-of-the-box configuration will override the default values listed here. Please consult your specific configuration to know which values will actually be used when the broker is running.

Name Description Default
acceptors a list of remoting acceptors n/a
acceptors.acceptor Each acceptor is composed for just an URL n/a
addresses a list of addresses n/a
address-settings a list of address-setting n/a
allow-failback Should stop backup on live restart. true
amqp-use-core-subscription-naming If true uses CORE queue naming convention for AMQP. false
async-connection-execution-enabled If False delivery would be always asynchronous. true
bindings-directory The folder in use for the bindings folder data/bindings
bridges a list of core bridges n/a
ha-policy the HA policy of this server none
broadcast-groups a list of broadcast-group n/a
broker-plugins a list of broker-plugins n/a
configuration-file-refresh-period The frequency in milliseconds the configuration file is checked for changes 5000
check-for-live-server Used for a live server to verify if there are other nodes with the same ID on the topology n/a
cluster-connections a list of cluster-connection n/a
cluster-password Cluster password. It applies to all cluster configurations. n/a
cluster-user Cluster username. It applies to all cluster configurations. n/a
connection-ttl-override if set, this will override how long (in ms) to keep a connection alive without receiving a ping. -1 disables this setting. -1
connection-ttl-check-interval how often (in ms) to check connections for ttl violation. 2000
connectors.connector The URL for the connector. This is a list n/a
create-bindings-dir true means that the server will create the bindings directory on start up. true
create-journal-dir true means that the journal directory will be created. true
discovery-groups a list of discovery-group n/a
disk-scan-period The interval where the disk is scanned for percentual usage. 5000
diverts a list of diverts to use n/a
global-max-size The amount in bytes before all addresses are considered full. Half of the JVM's -Xmx
graceful-shutdown-enabled true means that graceful shutdown is enabled. false
graceful-shutdown-timeout Timeout on waiting for clients to disconnect before server shutdown. -1
grouping-handler a message grouping handler n/a
id-cache-size The duplicate detection circular cache size. 20000
jmx-domain the JMX domain used to registered MBeans in the MBeanServer. org.apache.activemq
jmx-use-broker-name whether or not to use the broker name in the JMX properties. true
jmx-management-enabled true means that the management API is available via JMX. true
journal-buffer-size The size of the internal buffer on the journal in KB. 490KB
journal-buffer-timeout The Flush timeout for the journal buffer 500000 for ASYNCIO; 3333333 for NIO
journal-compact-min-files The minimal number of data files before we can start compacting. Setting this to 0 means compacting is disabled. 10
journal-compact-percentage The percentage of live data on which we consider compacting the journal. 30
journal-directory the directory to store the journal files in. data/journal
node-manager-lock-directory the directory to store the node manager lock file. same of journal-directory
journal-file-size the size (in bytes) of each journal file. 10MB
journal-lock-acquisition-timeout how long (in ms) to wait to acquire a file lock on the journal. -1
journal-max-io the maximum number of write requests that can be in the ASYNCIO queue at any one time. 4096 for ASYNCIO; 1 for NIO; ignored for MAPPED
journal-file-open-timeout the length of time in seconds to wait when opening a new journal file before timing out and failing. 5
journal-min-files how many journal files to pre-create. 2
journal-pool-files The upper threshold of the journal file pool, -1 means no Limit. The system will create as many files as needed however when reclaiming files it will shrink back to the journal-pool-files -1
journal-sync-non-transactional if true wait for non transaction data to be synced to the journal before returning response to client. true
journal-sync-transactional if true wait for transaction data to be synchronized to the journal before returning response to client. true
journal-type the type of journal to use. ASYNCIO
journal-datasync It will use msync/fsync on journal operations. true
large-messages-directory the directory to store large messages. data/largemessages
log-delegate-factory-class-name deprecated the name of the factory class to use for log delegation. n/a
management-address the name of the management address to send management messages to. activemq.management
management-notification-address the name of the address that consumers bind to receive management notifications. activemq.notifications
mask-password This option controls whether passwords in server configuration need be masked. If set to "true" the passwords are masked. false
max-saved-replicated-journals-size This specifies how many times a replicated backup server can restart after moving its files on start. Once there are this number of backup journal files the server will stop permanently after if fails back. -1 Means no Limit; 0 don't keep a copy at all. 2
max-disk-usage The max percentage of data we should use from disks. The broker will block while the disk is full. Disable by setting -1. 90
memory-measure-interval frequency to sample JVM memory in ms (or -1 to disable memory sampling). -1
memory-warning-threshold Percentage of available memory which will trigger a warning log. 25
message-counter-enabled true means that message counters are enabled. false
message-counter-max-day-history how many days to keep message counter history. 10
message-counter-sample-period the sample period (in ms) to use for message counters. 10000
message-expiry-scan-period how often (in ms) to scan for expired messages. 30000
message-expiry-thread-priority the priority of the thread expiring messages. 3
metrics-plugin a plugin to export metrics n/a
address-queue-scan-period how often (in ms) to scan for addresses & queues that should be removed. 30000
name node name; used in topology notifications if set. n/a
password-codec the name of the class (and optional configuration properties) used to decode masked passwords. Only valid when mask-password is true. n/a
page-max-concurrent-io The max number of concurrent reads allowed on paging. 5
page-sync-timeout The time in nanoseconds a page will be synced. 3333333 for ASYNCIO; journal-buffer-timeout for NIO
read-whole-page If true the whole page would be read, otherwise just seek and read while getting message. false
paging-directory the directory to store paged messages in. data/paging
persist-delivery-count-before-delivery True means that the delivery count is persisted before delivery. False means that this only happens after a message has been cancelled. false
persistence-enabled true means that the server will use the file based journal for persistence. true
persist-id-cache true means that ID's are persisted to the journal. true
queues deprecated use addresses n/a
remoting-incoming-interceptors a list of <class-name/> elements with the names of classes to use for intercepting incoming remoting packets n/a
remoting-outgoing-interceptors a list of <class-name/> elements with the names of classes to use for intercepting outgoing remoting packets n/a
resolveProtocols Use ServiceLoader to load protocol modules. true
resource-limit-settings a list of resource-limits n/a
scheduled-thread-pool-max-size Maximum number of threads to use for the scheduled thread pool. 5
security-enabled true means that security is enabled. true
security-invalidation-interval how long (in ms) to wait before invalidating the security cache. 10000
system-property-prefix Prefix for replacing configuration settings using Bean Utils. n/a
internal-naming-prefix the prefix used when naming the internal queues and addresses required for implementing certain behaviours. $.activemq.internal
populate-validated-user whether or not to add the name of the validated user to the messages that user sends. false
security-settings a list of security-setting. n/a
thread-pool-max-size Maximum number of threads to use for the thread pool. -1 means 'no limits'. 30
transaction-timeout how long (in ms) before a transaction can be removed from the resource manager after create time. 300000
transaction-timeout-scan-period how often (in ms) to scan for timeout transactions. 1000
wild-card-routing-enabled true means that the server supports wild card routing. true
network-check-NIC the NIC (Network Interface Controller) to be used on InetAddress.isReachable. n/a
network-check-URL-list the list of http URIs to be used to validate the network. n/a
network-check-list the list of pings to be used on ping or InetAddress.isReachable. n/a
network-check-period a frequency in milliseconds to how often we should check if the network is still up. 10000
network-check-timeout a timeout used in milliseconds to be used on the ping. 1000
network-check-ping-command the command used to oping IPV4 addresses. n/a
network-check-ping6-command the command used to oping IPV6 addresses. n/a
critical-analyzer enable or disable the critical analysis. true
critical-analyzer-timeout timeout used to do the critical analysis. 120000 ms
critical-analyzer-check-period time used to check the response times. 0.5 * critical-analyzer-timeout
critical-analyzer-policy should the server log, be halted or shutdown upon failures. LOG
resolve-protocols if true then the broker will make use of any protocol managers that are in available on the classpath, otherwise only the core protocol will be available, unless in embedded mode where users can inject their own protocol managers. true
resource-limit-settings a list of resource-limit. n/a
server-dump-interval interval to log server specific information (e.g. memory usage etc). -1
store the store type used by the server. n/a
wildcard-addresses parameters to configure wildcard address matching format. n/a

address-setting type

Name Description Default
match The filter to apply to the setting n/a
dead-letter-address Dead letter address n/a
expiry-address Expired messages address n/a
expiry-delay Expiration time override; -1 don't override -1
redelivery-delay Time to wait before redelivering a message 0
redelivery-delay-multiplier Multiplier to apply to the redelivery-delay 1.0
redelivery-collision-avoidance-factor an additional factor used to calculate an adjustment to the redelivery-delay (up or down) 0.0
max-redelivery-delay Max value for the redelivery-delay 10 * redelivery-delay
max-delivery-attempts Number of retries before dead letter address 10
max-size-bytes Max size a queue can be before invoking address-full-policy -1
max-size-bytes-reject-threshold Used with BLOCK, the max size an address can reach before messages are rejected; works in combination with max-size-bytes for AMQP clients only. -1
page-size-bytes Size of each file on page 10485760
page-max-cache-size Maximum number of files cached from paging 5
address-full-policy What to do when a queue reaches max-size-bytes PAGE
message-counter-history-day-limit Days to keep message counter data 0
last-value-queue deprecated Queue is a last value queue; see default-last-value-queue instead false
default-last-value-queue last-value value if none is set on the queue false
default-last-value-key last-value-key value if none is set on the queue null
default-exclusive-queue exclusive value if none is set on the queue false
default-non-destructive non-destructive value if none is set on the queue false
default-consumers-before-dispatch consumers-before-dispatch value if none is set on the queue 0
default-delay-before-dispatch delay-before-dispatch value if none is set on the queue -1
redistribution-delay Timeout before redistributing values after no consumers -1
send-to-dla-on-no-route Forward messages to DLA when no queues subscribing false
slow-consumer-threshold Min rate of msgs/sec consumed before a consumer is considered "slow" -1
slow-consumer-policy What to do when "slow" consumer is detected NOTIFY
slow-consumer-check-period How often to check for "slow" consumers 5
auto-create-jms-queues deprecated Create JMS queues automatically; see auto-create-queues & auto-create-addresses true
auto-delete-jms-queues deprecated Delete JMS queues automatically; see auto-create-queues & auto-create-addresses true
auto-create-jms-topics deprecated Create JMS topics automatically; see auto-create-queues & auto-create-addresses true
auto-delete-jms-topics deprecated Delete JMS topics automatically; see auto-create-queues & auto-create-addresses true
auto-create-queues Create queues automatically true
auto-delete-queues Delete auto-created queues automatically true
auto-delete-created-queues Delete created queues automatically false
auto-delete-queues-delay Delay for deleting auto-created queues 0
auto-delete-queues-message-count Message count the queue must be at or below before it can be auto deleted 0
config-delete-queues How to deal with queues deleted from XML at runtime OFF
auto-create-addresses Create addresses automatically true
auto-delete-addresses Delete auto-created addresses automatically true
auto-delete-addresses-delay Delay for deleting auto-created addresses 0
config-delete-addresses How to deal with addresses deleted from XML at runtime OFF
management-browse-page-size Number of messages a management resource can browse 200
default-purge-on-no-consumers purge-on-no-consumers value if none is set on the queue false
default-max-consumers max-consumers value if none is set on the queue -1
default-queue-routing-type Routing type for auto-created queues if the type can't be otherwise determined MULTICAST
default-address-routing-type Routing type for auto-created addresses if the type can't be otherwise determined MULTICAST
default-ring-size The ring-size applied to queues without an explicit ring-size configured -1
retroactive-message-count the number of messages to preserve for future queues created on the matching address 0

bridge type

Name Description Default
name unique name n/a
queue-name name of queue that this bridge consumes from n/a
forwarding-address address to forward to. If omitted original address is used n/a
ha whether this bridge supports fail-over false
filter optional core filter expression n/a
transformer-class-name optional name of transformer class n/a
min-large-message-size Limit before message is considered large. 100KB
check-period How often to check for TTL violation. -1 means disabled. 30000
connection-ttl TTL for the Bridge. This should be greater than the ping period. 60000
retry-interval period (in ms) between successive retries. 2000
retry-interval-multiplier multiplier to apply to successive retry intervals. 1
max-retry-interval Limit to the retry-interval growth. 2000
reconnect-attempts maximum number of retry attempts. -1 (no limit)
use-duplicate-detection forward duplicate detection headers? true
confirmation-window-size number of bytes before confirmations are sent. 1MB
producer-window-size Producer flow control size on the bridge. -1 (disabled)
user Username for the bridge, the default is the cluster username. n/a
password Password for the bridge, default is the cluster password. n/a
reconnect-attempts-same-node Number of retries before trying another node. 10
routing-type how to set the routing-type on the bridged message PASS

broadcast-group type

Name Type
name unique name
local-bind-address Local bind address that the datagram socket is bound to.
local-bind-port Local port to which the datagram socket is bound to.
group-address Multicast address to which the data will be broadcast.
group-port UDP port number used for broadcasting.
broadcast-period Period in milliseconds between consecutive broadcasts. Default=2000.
jgroups-file Name of JGroups configuration file.
jgroups-channel Name of JGroups Channel.
connector-ref The connector to broadcast.

cluster-connection type

Name Description Default
name unique name n/a
address name of the address this cluster connection applies to n/a
connector-ref Name of the connector reference to use. n/a
check-period The period (in milliseconds) used to check if the cluster connection has failed to receive pings from another server 30000
connection-ttl Timeout for TTL. 60000
min-large-message-size Messages larger than this are considered large-messages. 100KB
call-timeout Time(ms) before giving up on blocked calls. 30000
retry-interval period (in ms) between successive retries. 500
retry-interval-multiplier multiplier to apply to the retry-interval. 1
max-retry-interval Maximum value for retry-interval. 2000
reconnect-attempts How many attempts should be made to reconnect after failure. -1
use-duplicate-detection should duplicate detection headers be inserted in forwarded messages? true
message-load-balancing how should messages be load balanced? OFF
max-hops maximum number of hops cluster topology is propagated. 1
confirmation-window-size The size (in bytes) of the window used for confirming data from the server connected to. 1048576
producer-window-size Flow Control for the Cluster connection bridge. -1 (disabled)
call-failover-timeout How long to wait for a reply if in the middle of a fail-over. -1 means wait forever. -1
notification-interval how often the cluster connection will notify the cluster of its existence right after joining the cluster. 1000
notification-attempts how many times this cluster connection will notify the cluster of its existence right after joining the cluster 2

discovery-group type

Name Description
name unique name
group-address Multicast IP address of the group to listen on
group-port UDP port number of the multi cast group
jgroups-file Name of a JGroups configuration file. If specified, the server uses JGroups for discovery.
jgroups-channel Name of a JGroups Channel. If specified, the server uses the named channel for discovery.
refresh-timeout Period the discovery group waits after receiving the last broadcast from a particular server before removing that servers connector pair entry from its list. Default=10000
local-bind-address local bind address that the datagram socket is bound to
local-bind-port local port to which the datagram socket is bound to. Default=-1
initial-wait-timeout time to wait for an initial broadcast to give us at least one node in the cluster. Default=10000

divert type

Name Description
name unique name
transformer-class-name an optional class name of a transformer
exclusive whether this is an exclusive divert. Default=false
routing-name the routing name for the divert
address the address this divert will divert from
forwarding-address the forwarding address for the divert
filter optional core filter expression
routing-type how to set the routing-type on the diverted message. Default=STRIP

address type

Name Description
name unique name n/a
anycast list of anycast queues
multicast list of multicast queues

queue type

Name Description Default
name unique name n/a
filter optional core filter expression n/a
durable whether the queue is durable (persistent). true
user the name of the user to associate with the creation of the queue n/a
max-consumers the max number of consumers allowed on this queue -1 (no max)
purge-on-no-consumers whether or not to delete all messages and prevent routing when no consumers are connected false
exclusive only deliver messages to one of the connected consumers false
last-value use last-value semantics false
ring-size the size this queue should maintain according to ring semantics based on default-ring-size address-setting
consumers-before-dispatch number of consumers required before dispatching messages 0
delay-before-dispatch milliseconds to wait for consumers-before-dispatch to be met before dispatching messages anyway -1 (wait forever)

security-setting type

Name Description
match address expression
permission
permission.type the type of permission
permission.roles a comma-separated list of roles to apply the permission to
role-mapping A simple role mapping that can be used to map roles from external authentication providers (i.e. LDAP) to internal roles
role-mapping.from The external role which should be mapped
role-mapping.to The internal role which should be assigned to the authenticated user

broker-plugin type

Name Description
property properties to configure a plugin
class-name the name of the broker plugin class to instantiate

metrics-plugin type

Name Description
property properties to configure a plugin
class-name the name of the metrics plugin class to instantiate

resource-limit type

Name Description Default
match the name of the user to whom the limits should be applied n/a
max-connections how many connections are allowed by the matched user -1 (no max)
max-queues how many queues can be created by the matched user -1 (no max)

grouping-handler type

Name Description Default
name A unique name n/a
type LOCAL or REMOTE n/a
address A reference to a cluster-connection address n/a
timeout How long to wait for a decision 5000
group-timeout How long a group binding will be used. -1 (disabled)
reaper-period How often the reaper will be run to check for timed out group bindings. Only valid for LOCAL handlers. 30000

results matching ""

    No results matching ""